How to change MAC Address in SARD

roby — Mon, 15 Jan 2007 23:24:18 GMT

Hi all,

I am carring out an 802.15.4 ( lib ver -> 1.603 )Star Network by using SARD boards. I would like to change the default Extended MAC address on each one by setting up my Extended MAC Address.

I tried to modify the NV_data.c file MAC address in the Init_NV_RAM_Struct_t section but I does not works.

Can anyone help me?

Thanks
Roby

Re: How to change MAC Address in SARD

EvanYin — Wed, 17 Jan 2007 11:49:03 GMT

#ifdef SYSTEM_CLOCK_16_78MHZ
0x10, // 16 MHz -> ~16,78 MHz
//0x3646,
(ABEL_XTAL_TRIM | ABEL_XTAL_BIAS_CURRENT | ABEL_CHIP_RATE | 6),
(ABEL_CCA_ENERGY_DETECT_THRESHOLD | ABEL_POWER_COMPENSATION_OFFSET),
// ICG clock
0x18,
0x60, // 0x60 => CPU clk=32,78 MHz, Buc clk = 16,39 MHz
// ICG Filter
0x02,
0x40,
// SCI
0x00,
0x09, // 0x09 => 115200 @ 16,78 MHz
#endif SYSTEM_CLOCK_16_78MHZ

// MACµØÖ·
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,

rpelace the upper line with the MAC you want,,,, such as "0x11,0x22,0x33,0x44,0xFF,0xFF,0xFF,0xFF,"

topic Re: How to change MAC Address in SARD in 8-bit Microcontrollers

How to change MAC Address in SARD

Re: How to change MAC Address in SARD