topic Re: Help with project in 8-bit Microcontrollers

MC68HC908JB16 - Help with project

kacto — Sun, 12 Aug 2007 01:31:00 GMT

Hi, I´m new with MCU´s and i need help. I am trying to use the MC68HC908JB16 to receive data from de PC and storage on an external EEPROM. I dont have any preference for the memory but must have at least 2Mb x 8 capacity. The soft part i made it with vb 6.0, what i need is someone who can tell me wich are the code lines to put on my program to control the usb port. In fact i only need where i can get that information, because im not expecting someone else solve my problem. Besides, i need the lines that goes on the assembler code, i probably use code warrior for programming. Well, thats all. Sorry if my english is not good, im not from america.

Thanks

Added p/n to subject.

Message Edited by NLFSJ on 2007-08-12 11:48 PM

Re: Help with project

fredycolombia — Mon, 13 Aug 2007 06:41:35 GMT

Hi kacto

I'm new in this forums too.
I recommend that you use, code warrior for development your project and do it in c or c++, I think is more dificult to do that in assembler.
I am doing a project with jb16, and working the module usb for collect data and and transmit it.
One person recomment me in this forums to visit this site: http://hc08web.de/usb08/ this can help you to get started in module usb, is a good introduction to do your project.

regards,
fredy.

Message Edited by fredycolombia on 2007-08-12 06:48 PM

Re: Help with project

mauricio2346 — Mon, 13 Aug 2007 09:23:04 GMT

Hi fredy and kacto:
I'm from Colombia too (i think you are Colombian because your nick say it). you know that the better freescale's devices sold in Colombia out-of-date, but they works great. your choice is awesome , but i prefer gp32 and jk1, jk3, qb8 and so. C++ is the easiest way to begin, assembled is a kind of complicated, it uses some internal registers and a lot of hexadecimal numbers that sometimes it makes us crazy!!! jeje, anyway, i started with serial programmers and serial comunication and they are so easy. maybe you can help me with a little problem that i have programming two diferent responses with IRQ interrupts. You can see mi post above this.

THANKS!!!