8-bit MicrocontrollersのトピックRe: Help with AP8 (OSC-CRISTAL)

Help with AP8 (OSC-CRISTAL)

alecelario — Thu, 11 Jan 2007 04:53:02 GMT

Hello, i have an AP8 and this work perfect with the internal oscilator, but a need use the cristal oscilator. I make a routine to configurate pctl,pmsh,pmsl,pmrs,pmds and pbwc register but doesn´t work. The routine is:

  mov     #%00111001,config1
  mov     #%00000001,config2
  mov     #%00000001,pctl               ;programo P=$0, E=$0
  mov     #%00000001,pmsh            ;programo N=$F5 con pmsh y pmsl

   mov     #%11101001,pmsl           ;programo N=$F5 con pmsh y pmsl
  mov     #%01000000,pmrs           ;programo L=$40
  mov     #%00000001,pmds          ;R=$1
   bset    5,pctl                                ;enciendo el PLL con el bit PLLON=1
  bset    7,pbwc          ;pongo en modo automático en PLL con el bit AUTO=1
waitPLL:
   brclr 6,pbwc,waitPLL  ;salta a waitPLL si el bit LOCK=0

;( frecuencia incorrecta o variable)

bset 4,pctl ;sino sigue y engancha a frecuencia del PLL

Los parámtros P,N,L,E son para Fbus=2MHz, GCMVCLK=GCMPCLK=8MHz

What is the problem?

Re: Help with AP8 (OSC-CRISTAL)

rocco — Thu, 11 Jan 2007 06:15:41 GMT

Hi, Alecelario:

Just a guess:

Is this the first time you have written to Config1 or Config2? Could other initialization code have written to the previously?

Config1 and Config2 are "Write-once" registers. If they have been previously written since reset, any further writes will be ignored.

Re: Help with AP8 (OSC-CRISTAL)

peg — Thu, 11 Jan 2007 18:11:15 GMT

Hi Alecelario,

Firstly, this is a non-A AP8?

What frequency is your crystal?

You have not shown the value in the MOR register.

The value in CONFIG2 for bits 3:4 you show as 0:0, this is for internal oscillator.

1:0 is crystal.

Regards

Peg