topic How to built reloctable software project in CW in 8-bit Microcontrollers https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142155#M6149 <HTML><HEAD></HEAD><BODY><DIV>I try it again with an other subject. Can anybody mail to me samples or descriptions how to do this, specially how I have to manage the variables&nbsp;all the INCLUDE files, which variables should be global end where should there be placed and so on, so that at debugging time all source-files are in the debugger for working with.</DIV></BODY></HTML> Thu, 06 Jul 2006 13:38:39 GMT Truk 2006-07-06T13:38:39Z How to built reloctable software project in CW https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142155#M6149 <HTML><HEAD></HEAD><BODY><DIV>I try it again with an other subject. Can anybody mail to me samples or descriptions how to do this, specially how I have to manage the variables&nbsp;all the INCLUDE files, which variables should be global end where should there be placed and so on, so that at debugging time all source-files are in the debugger for working with.</DIV></BODY></HTML> Thu, 06 Jul 2006 13:38:39 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142155#M6149 Truk 2006-07-06T13:38:39Z Re: How to built reloctable software project in CW https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142156#M6150 <HTML><HEAD></HEAD><BODY><DIV></DIV><P>The easiest way to start with a new project is to use CW's New Project wizard; just answer all the questions it asks you and a empty, but working, project will be created for you into which you then can insert your source and include files. Regarding the global variables, see this thread <A href="http://forums.freescale.com/freescale/board/message?board.id=CWCOMM&amp;message.id=1272&amp;jump=true" target="_blank">http://forums.freescale.com/freescale/board/message?board.id=CWCOMM&amp;message.id=1272&amp;jump=true</A></P><P>&nbsp;</P></BODY></HTML> Thu, 06 Jul 2006 13:46:32 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142156#M6150 Sten 2006-07-06T13:46:32Z Re: How to built reloctable software project in CW https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142157#M6151 <HTML><HEAD></HEAD><BODY><DIV></DIV><P>My problem is, that I didn't understud the expanations which are for C-programming and not for assembler. If anyone has a small sample project which shows all the definitions it would be really very very helpfull for me!</P></BODY></HTML> Fri, 07 Jul 2006 22:15:35 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142157#M6151 Truk 2006-07-07T22:15:35Z Re: How to built reloctable software project in CW https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142158#M6152 <HTML><HEAD></HEAD><BODY><DIV>Hello Truk,</DIV><DIV>&nbsp;</DIV><DIV>humm some relocatable examples could be found here (CW08 v5.0):</DIV><DIV>&lt;your installation directory&gt;\(CodeWarrior_Examples)\HC08\Assembly Examples\</DIV><DIV>&nbsp;</DIV><DIV>- BlackWolf -</DIV></BODY></HTML> Thu, 13 Jul 2006 19:55:54 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-built-reloctable-software-project-in-CW/m-p/142158#M6152 Blackwolf 2006-07-13T19:55:54Z