8-bit MicrocontrollersのトピックRe: Flash programming routine/EEPROM emulation

Flash programming routine/EEPROM emulation

FordFairlaneBen — Tue, 02 Jan 2007 18:13:07 GMT

Hi:

I´m looking for a routine which allows me to write in flash and use it like an EEPROM in a MC9s08AW60. I only want to write some bytes like date, serial number and things like that. Is there any AN or something like that where shows how to do that?.

Thanks.

Best Regards

Re: Flash programming routine/EEPROM emulation

Alban — Tue, 02 Jan 2007 18:44:55 GMT

Hello,

In the page of the device, you will find the tools to program it.
There is a file for Flash programming drivers to include in your project.

Search for Flash Drivers in the AW60 MCU page.

Cheers,
Alban.

Re: Flash programming routine/EEPROM emulation

FordFairlaneBen — Tue, 02 Jan 2007 19:56:18 GMT

Hi it´s me again:

I have downloaded what you said but the code is in assembler. I am programming in C. How can I do to mix both langauges in Code Warrior?.

Sorry about so many questions but this MCU is new for me and I have lot of doubts.

Thank you very much.

Best regards.

Re: Flash programming routine/EEPROM emulation

irob — Wed, 10 Jan 2007 03:17:00 GMT

See the old Metrowerks technical note, TN015 "Mixing Assembly and ANSCI C in an Application". I don't think it's on Freescale's server anymore, so I've attached it for you.

Also, here are some other good places to start:

Flash Writing and Erasing for the MC9S08QG8

HCS08 Flash Erase/Write Routines

FLASH PROBLEMS HELP

Message Edited by irob on 2007-01-0912:28 PM