topic Programming TRIM Values In Flash in 8-bit Microcontrollers https://community.nxp.com/t5/8-bit-Microcontrollers/Programming-TRIM-Values-In-Flash/m-p/138383#M4952 <HTML><HEAD></HEAD><BODY><DIV>I would appreciate if anyone could share the assembly code for storing the ICG TRIM value in flash.&nbsp; I could write it but I'm sure this has been done a thousand times before.</DIV><DIV>&nbsp;</DIV><DIV>I am using both the HCS GB60 and also the QG8.&nbsp; I realise the code would be different for these parts.</DIV><DIV>&nbsp;</DIV><DIV>thanks</DIV><DIV>&nbsp;</DIV><DIV>David</DIV></BODY></HTML> Wed, 27 Jun 2007 06:08:17 GMT Davo 2007-06-27T06:08:17Z Programming TRIM Values In Flash https://community.nxp.com/t5/8-bit-Microcontrollers/Programming-TRIM-Values-In-Flash/m-p/138383#M4952 <HTML><HEAD></HEAD><BODY><DIV>I would appreciate if anyone could share the assembly code for storing the ICG TRIM value in flash.&nbsp; I could write it but I'm sure this has been done a thousand times before.</DIV><DIV>&nbsp;</DIV><DIV>I am using both the HCS GB60 and also the QG8.&nbsp; I realise the code would be different for these parts.</DIV><DIV>&nbsp;</DIV><DIV>thanks</DIV><DIV>&nbsp;</DIV><DIV>David</DIV></BODY></HTML> Wed, 27 Jun 2007 06:08:17 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/Programming-TRIM-Values-In-Flash/m-p/138383#M4952 Davo 2007-06-27T06:08:17Z Re: Programming TRIM Values In Flash https://community.nxp.com/t5/8-bit-Microcontrollers/Programming-TRIM-Values-In-Flash/m-p/138384#M4953 <HTML><HEAD></HEAD><BODY><DIV>Hi David,</DIV><DIV>&nbsp;</DIV><DIV>Why not just do it with your flash programmer?</DIV><DIV>&nbsp;</DIV><DIV>AN2496 and its accompanying software shows you how to determine the correct trim and then programme it in yourself. This should give you all you need.</DIV><DIV>Accessed from the GT product page.</DIV><DIV>&nbsp;</DIV></BODY></HTML> Wed, 27 Jun 2007 06:16:07 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/Programming-TRIM-Values-In-Flash/m-p/138384#M4953 peg 2007-06-27T06:16:07Z