topic Re: HCS08 - Unrequest break on interrupt in 8-bit Microcontrollers

HCS08 - Unrequest break on interrupt

Richard777 — Sat, 23 Jun 2007 00:40:49 GMT

Hi guys, I'm using the CodeWarrior for HCS08 and debug with P&E BDM Multilink, my problem is that when debbugin my application the debbuger stop execution on interrupt vector ( SCI in my case ) and haven't breakpoint in this ISR !. Exists a way to eliminate this behavior?

Thanks in advance !

Added product family to subject.

Message Edited by NLFSJ on 2007-06-22 03:49 PM

Re: HCS08 - Unrequest break on interrupt

peg — Sun, 24 Jun 2007 08:21:38 GMT

Hi Richard,

When EXACTLY does it break?

Can you simply restart it and it carries on?

Or is it truly broken?

Re: HCS08 - Unrequest break on interrupt

Richard777 — Mon, 25 Jun 2007 21:55:02 GMT

Hi Peg,

>When EXACTLY does it break?

Break after routine of transmition

>Can you simply restart it and it carries on?

This happend.

Thanks !

Re: S08 - Unrequest break on interrupt

Alban — Wed, 27 Jun 2007 08:39:44 GMT

Hello,

Is there an error message in the spirit of "Illegal Breakpoint" ?
Or any other indication.

Regards,
Alban.

Re: S08 - Unrequest break on interrupt

bigmac — Wed, 27 Jun 2007 08:58:04 GMT

This seem to be a split thread with the Codewarrior 8- and 16-bit forum.

http://forums.freescale.com/freescale/board/message?board.id=CW816COMM&thread.id=2772

Message Edited by bigmac on 2007-06-27 12:01 PM

Re: S08 - Unrequest break on interrupt

Alban — Wed, 27 Jun 2007 09:30:13 GMT

Thanks Mac, I was just realizing.

Thread locked.

PLEASE, again Do NOT Crosspost, a good example here on how to waste time