topic Re: Information sobre SMAC in 8-bit Microcontrollers

Information sobre SMAC

Nicom — Tue, 30 May 2006 17:37:39 GMT

Hello

I search information about SMAC of MC9S08GT60

I have SMAC of MC9S08GB60 but I want the librairies of the MC9S08GT60

Do you know where can I find this librairies ?

Thanks Nicolas

Re: Information sobre SMAC

peg — Tue, 30 May 2006 18:33:34 GMT

Hi Nicholas,

I don't really know what you have, but....

The GT60 is really a GB60 with less pins so for the purpose of the SMAC (which uses the SPI and a few pins) the code to run this will be the same for both.

Regards David

Re: Information sobre SMAC

Nicom — Tue, 30 May 2006 18:44:31 GMT

I have information about SMAC and librairies of the GB60 but

in my program I want to use an GT60 and Idon't have the good libriaires because I have only the librairies of the GB60 and not the GT60

So My program is not correct

Do you know my problem ?

Thanks

nico

Re: Information sobre SMAC

peg — Tue, 30 May 2006 18:52:40 GMT

Hi nico,

I have SMAC4.1a and two 13192-SARD boards which use GT60. I have downloaded and run all the examples on my boards successfully so no, I don't know your problem.

Regards David

Re: Information sobre SMAC

Nicom — Wed, 31 May 2006 16:26:14 GMT

Thank you

I am beghinning to understand

But I want to make a program to program my GT60 .

I want that my GT60 Sent and receive data.

I search how add the librairies at my project

What the name of the librairies where there are the examples of functions?

Do you understand my problem ?

I'm a new bee and i have lot of problem to understand CodeWarrior

I'm sorry for my bad English

Thanks

Nicolas

Re: Information sobre SMAC

peg — Wed, 31 May 2006 19:29:19 GMT

Hi nico,

If you are using SARD boards the library is:

SMAC_13192sard_4_1a.lib

If you open an example its under the SMAC section in the project pane.

It is located in: \SMAC4.1a\S08\smac\3.1\bin

The source for it is: \SMAC4.1a\SMAC(Sources)

You have to find where the functions are used within the supplied examples yourself.

Hope this helps,

Regards David

Re: Information sobre SMAC

Nicom — Wed, 07 Jun 2006 16:24:36 GMT

Thanks !

I can use the funcction now.

I made this program :

Code:

for(;;)                {    UINT8 MLMESetChannelRequest(UINT8 u3Channel);    UINT8 MCPSDataRequest(tTxPacket *psTxPacket);    UINT8 MLMESetChannelRequest(UINT8 u12Channel);  UINT8 MLMERXEnableRequest(tRxPacket *psRxPacket, UINT32 u32Timeout);}

I want to receive and send data, but with this function, nothing sent and received

How use this function to send datas (bacon)?

Thanks

Nico

(Alban formatted code)

Message Edited by Alban on 2006-06-07 11:04 AM