8-bit MicrocontrollersのトピックRe: Gang Programmer for HC08

Gang Programmer for HC08

glork — Tue, 21 Nov 2006 10:12:38 GMT

Hello.
I'm looking for a (say 4-) gang programmer for the 68HC908QY4 dip processor for production use. Anyone know a source, have experience??
Thanks in advance.
ron

Re: Gang Programmer for HC08

jah — Thu, 23 Nov 2006 04:25:19 GMT

consider
tribalmicro.com
ALL-GANG Gang Programmer
http://www.tribalmicro.com/all-gang/
you will need a base unit + 4 or 8 position head + socket adapter

also consider the cyclone from pemicro.com, granted not a 4head unit but costing lo enough to buy 4units and a usb hub.

Re: Gang Programmer for HC08

HonHo — Fri, 24 Nov 2006 11:24:01 GMT

We are SofTec Microsystems, a famous European company which specialize to develop hardware debuggers and programmers for Freescale microcontrollers.

If you consider to have socket programming, I would suggest you to have a look on our MP8011A gang programmer (1 to 8).

On the other hand, we are also provide in-circuit programming solution, inDART-One. It is a gangable in-circuit programmer AND debugger for HC08/HCS08/HCS12(X)/RS08 families. InDART-One also provides unique FAST PROGRAMMING algorithm to increase the programming speed.

For more information, please visit the following links respectively.

http://www.softecmicro.com/products.html?type=detail&title=MP8011A

http://www.softecmicro.com/products.html?type=detail&title=inDART-One

Thank you.

Message Edited by Hon Ho on 2006-11-2411:24 AM