topic Can't Flash Programming my 13192-EVB in 8-bit Microcontrollers https://community.nxp.com/t5/8-bit-Microcontrollers/Can-t-Flash-Programming-my-13192-EVB/m-p/134995#M3901 <HTML><HEAD></HEAD><BODY><DIV>&nbsp;</DIV><DIV>&nbsp;Just got my 13193EVK Kit.&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>Trying to run the 'Range Demo Plus' Demo on 13192EVB boards as described in the User's Guide.&nbsp; But when I power on the 13192EVB boards (2 of my 3&nbsp; boards), not all four LEDs are on.&nbsp; According to the User's Guide, this means that the PTC application is not on the board.&nbsp; So I tried to use the&nbsp;Embedded Bootloader to load it.&nbsp;&nbsp; I followed the procedures described in the User's Guide ( section 5.7.2) :</DIV><DIV>&nbsp;&nbsp;&nbsp;<SPAN style="color: #FF3300;">hold down&nbsp;all four buttons ( S1-S4 ), press and release the Reset button, then release the 4&nbsp;buttons,</SPAN></DIV><DIV>&nbsp;&nbsp;&nbsp;But the 4 LEDs just blink once ( not staying ON ).</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;&nbsp;Please help.&nbsp; &nbsp;&nbsp;</DIV></BODY></HTML> Sun, 07 May 2006 15:32:54 GMT LC 2006-05-07T15:32:54Z Can't Flash Programming my 13192-EVB https://community.nxp.com/t5/8-bit-Microcontrollers/Can-t-Flash-Programming-my-13192-EVB/m-p/134995#M3901 <HTML><HEAD></HEAD><BODY><DIV>&nbsp;</DIV><DIV>&nbsp;Just got my 13193EVK Kit.&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>Trying to run the 'Range Demo Plus' Demo on 13192EVB boards as described in the User's Guide.&nbsp; But when I power on the 13192EVB boards (2 of my 3&nbsp; boards), not all four LEDs are on.&nbsp; According to the User's Guide, this means that the PTC application is not on the board.&nbsp; So I tried to use the&nbsp;Embedded Bootloader to load it.&nbsp;&nbsp; I followed the procedures described in the User's Guide ( section 5.7.2) :</DIV><DIV>&nbsp;&nbsp;&nbsp;<SPAN style="color: #FF3300;">hold down&nbsp;all four buttons ( S1-S4 ), press and release the Reset button, then release the 4&nbsp;buttons,</SPAN></DIV><DIV>&nbsp;&nbsp;&nbsp;But the 4 LEDs just blink once ( not staying ON ).</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;&nbsp;Please help.&nbsp; &nbsp;&nbsp;</DIV></BODY></HTML> Sun, 07 May 2006 15:32:54 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/Can-t-Flash-Programming-my-13192-EVB/m-p/134995#M3901 LC 2006-05-07T15:32:54Z Re: Can't Flash Programming my 13192-EVB https://community.nxp.com/t5/8-bit-Microcontrollers/Can-t-Flash-Programming-my-13192-EVB/m-p/134996#M3902 <HTML><HEAD></HEAD><BODY><DIV></DIV>I suggest that you buy the BDM programmer it is easier and faster to use</BODY></HTML> Mon, 08 May 2006 00:35:45 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/Can-t-Flash-Programming-my-13192-EVB/m-p/134996#M3902 Tarek 2006-05-08T00:35:45Z Re: Can't Flash Programming my 13192-EVB https://community.nxp.com/t5/8-bit-Microcontrollers/Can-t-Flash-Programming-my-13192-EVB/m-p/134997#M3903 <HTML><HEAD></HEAD><BODY>try holding down just switches 2 and 4 that does the job sometimes.</BODY></HTML> Tue, 20 Jun 2006 23:15:40 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/Can-t-Flash-Programming-my-13192-EVB/m-p/134997#M3903 reundo 2006-06-20T23:15:40Z