8-bit MicrocontrollersのトピックRe: Windows version of the HCS08QG8 bootloader

Windows version of the HCS08QG8 bootloader

FC — Mon, 07 May 2007 05:07:27 GMT

Hi,

Can a windows version of the HCS08QG8 bootloader be made? The dos prompt becomes hard to work with.

How difficult will it be to make a simple GUI for the bootloader program?

Thanks

Re: Windows version of the HCS08QG8 bootloader

Curt — Mon, 07 May 2007 21:58:08 GMT

Hi FC:

It should be pretty easy to write a windows GUI "wrapper" for the DOS program using

something like Delphi or Visual C if you have access to the bootloader's command line interface. But writing a native windows bootloader might be really hard (depending on windows version) if it needs to use interrupts. Since Win98, it has become harder and harder to interface directly with the hardware on your PC, and especailly the interrupt ports.

Re: Windows version of the HCS08QG8 bootloader

ok2ucx — Thu, 24 May 2007 22:23:04 GMT

Lucky you,

the GUI already exists, it's being tested and will become a part of the next AN2295SW release. Unfortunately I don't know when this occurs.

Attached you may try this alpha version and give us the feedback on how/if it works for you.

Regards,

Pavel ok2ucx

AN2295 developper

--
Alban Edit: FSL s/w need a license acceptance. Working on packaging it and reposting.

Message Edited by Alban on 2007-05-25 02:45 PM

Re: Windows version of the HCS08QG8 bootloader

Alban — Fri, 25 May 2007 21:00:16 GMT

Hello,

Here is a packed version with license.

Cheers,
Alban.

AN2295-Bootloader-Control-alpha-1.exe

Message Edited by t.dowe on 2009-10-20 01:30 PM