https://community.nxp.com/t5/8-bit-Microcontrollers/Tool-to-read-MC68HC11E1CFNE2-microcontroller/m-p/1759148#M23803 <P>Hi&nbsp;<a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/220626">@ingtasco</a></P> <P>Just as a heads up, this part is being discontinued as shown in its page:&nbsp;<A href="https://www.nxp.com/part/MC68HC11E1CFNE3#/" target="_blank">MC68HC11E1CFNE3 Product Information</A>, and it is not recommended for new designs.</P> <P>Elnec supports the&nbsp;<A href="https://www.elnec.com/en/products/universal-programmers/beeprog2/" target="_blank">BeeProg2</A>, (or its cost-effective counterpart&nbsp;<A href="https://www.elnec.com/en/products/universal-programmers/beeprog2c/" target="_blank">BeeProg2C</A>). Please contact Elnec firstly for availability and support. Please be aware&nbsp;<SPAN>you will need to add some wires and pins to use the&nbsp;</SPAN>programmer.</P> <P>Best regards,<BR />Julián</P> Fri, 17 Nov 2023 16:58:54 GMT Julián_AragónM 2023-11-17T16:58:54Z https://community.nxp.com/t5/8-bit-Microcontrollers/Tool-to-read-MC68HC11E1CFNE2-microcontroller/m-p/1755175#M23797 <P>Hello, good afternoon, I recently received a board that has the following microcontroller: MC68HC11E1CFNE2, I would like to know what tool is needed to connect to the microcontroller (Hardware and Software), thank you very much in advance.</P><P>Thanks.</P><P>Alvaro.</P> Thu, 09 Nov 2023 21:05:57 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/Tool-to-read-MC68HC11E1CFNE2-microcontroller/m-p/1755175#M23797 ingtasco 2023-11-09T21:05:57Z https://community.nxp.com/t5/8-bit-Microcontrollers/Tool-to-read-MC68HC11E1CFNE2-microcontroller/m-p/1759148#M23803 <P>Hi&nbsp;<a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/220626">@ingtasco</a></P> <P>Just as a heads up, this part is being discontinued as shown in its page:&nbsp;<A href="https://www.nxp.com/part/MC68HC11E1CFNE3#/" target="_blank">MC68HC11E1CFNE3 Product Information</A>, and it is not recommended for new designs.</P> <P>Elnec supports the&nbsp;<A href="https://www.elnec.com/en/products/universal-programmers/beeprog2/" target="_blank">BeeProg2</A>, (or its cost-effective counterpart&nbsp;<A href="https://www.elnec.com/en/products/universal-programmers/beeprog2c/" target="_blank">BeeProg2C</A>). Please contact Elnec firstly for availability and support. Please be aware&nbsp;<SPAN>you will need to add some wires and pins to use the&nbsp;</SPAN>programmer.</P> <P>Best regards,<BR />Julián</P> Fri, 17 Nov 2023 16:58:54 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/Tool-to-read-MC68HC11E1CFNE2-microcontroller/m-p/1759148#M23803 Julián_AragónM 2023-11-17T16:58:54Z