How to vector redirect S08PT

dustyln — Sun, 28 Jun 2020 17:10:57 GMT

Design bootloader and application，this is my memory map：

boot address:0xE000-0xFFFF

app address:0x3200-0xFDFF

set flash protection higher address range is 8Kbytes

This is my NVPROT register config:

NVPROT_INIT @0x0000FF7C = 0xD7;

The bootloader can enter the application normally，but interrupt cannot enter normally，

Vector redirection is unsuccessful，so how to vector redirect?

The application note "SCI Bootloader for S08PB16" has no attachments for download，Where to find？

Re: How to vector redirect S08PT

vicentegomez — Mon, 29 Jun 2020 22:27:13 GMT

Please check the following link

I hope this will help you

Regards

Vicente Gomez