UART's commands for a RS08 microcontroller

colargol8 — Tue, 25 Aug 2020 12:07:39 GMT

Hy, I am newbie in microcontroller, I am looking for a UART's commands for a RS08 microcontroller and way to use it.I have a MC9RS08KB12. Can you help me?

Re: UART's commands for a RS08 microcontroller

vicentegomez — Tue, 25 Aug 2020 16:59:25 GMT

Please check the following application note, almost all the peripherals for the RS08 are the same than the S08, so you can use this document as good start point

https://www.nxp.com/docs/en/user-guide/HCS08QRUG.pdf

software (this is old, but use it as reference)

https://www.nxp.com/docs/en/user-guide/QE128QRUGSW.zip

also check

HS908SH8 - SCI module wrong data transmited/received

https://community.nxp.com/thread/302646

The RS, SH and the QE has the same SCI module

I hope this will help you

Take care

8-bit MicrocontrollersのトピックUART's commands for a RS08 microcontroller

UART's commands for a RS08 microcontroller

Re: UART's commands for a RS08 microcontroller