topic mc908az32acfue in 8-bit Microcontrollers https://community.nxp.com/t5/8-bit-Microcontrollers/mc908az32acfue/m-p/488832#M21858 <HTML><HEAD></HEAD><BODY><P><STRONG>Does anyone know how to program this microcontroller via ISP?</STRONG></P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>I have a beeprog+ programmer. It has some tips on the software but not very helpful.</P><P>I want to program in via ISP because it shouldn´t be removed from the electronic board. On the board there´s a connector with 6 pins that go straight to the microcontroller: <STRONG>IRQ, VSS, VDD, PTA0, AVSS/VREF and PTC5. But how to connect it correctly to read/write the microcontroller?</STRONG></P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Thanks.</P></BODY></HTML> Fri, 29 Apr 2016 11:26:25 GMT eduardosuzin 2016-04-29T11:26:25Z mc908az32acfue https://community.nxp.com/t5/8-bit-Microcontrollers/mc908az32acfue/m-p/488832#M21858 <HTML><HEAD></HEAD><BODY><P><STRONG>Does anyone know how to program this microcontroller via ISP?</STRONG></P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>I have a beeprog+ programmer. It has some tips on the software but not very helpful.</P><P>I want to program in via ISP because it shouldn´t be removed from the electronic board. On the board there´s a connector with 6 pins that go straight to the microcontroller: <STRONG>IRQ, VSS, VDD, PTA0, AVSS/VREF and PTC5. But how to connect it correctly to read/write the microcontroller?</STRONG></P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Thanks.</P></BODY></HTML> Fri, 29 Apr 2016 11:26:25 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/mc908az32acfue/m-p/488832#M21858 eduardosuzin 2016-04-29T11:26:25Z