topic Re: S908QC16E0MDTER RAM check in 8-bit Microcontrollers

S908QC16E0MDTER RAM check

王剑翰 — Tue, 16 Sep 2014 03:21:53 GMT

Dear,

We use the CANalyzer tool to test the failure board and find the defect is for SUB RAM CHECK. (The failure only occurs in high temperature(105℃))

So I want to check the unit(S908QC16E0MDTER is as the sub cpu in the board) and check the error address information, but I don't know how to do it.

Can you recommend a software tool or debug program] for this case to check the error address information of RAM?

Thank you~!

Rick_Li — Wed, 17 Sep 2014 07:39:28 GMT

Hi, my suggestion is using classic CodeWarrior v6.3 from Freescale or CPROG08SZ from PEmicro.

CodeWarrior:

CPROG08SZ:

as to the debugger interface, a cyclonePro or USB-ML-MON08 is needed.

see them at:

王剑翰 — Thu, 25 Sep 2014 03:25:14 GMT

Thank you for your kindly answer.

I have get the tools: CPROG08SZ from PEmicro and USB-ML-MON08.

Then, how to use them to check the error address information of RAM? Could you kindly give me an example ?

Best regards!