8-bit MicrocontrollersのトピックAbout the FreeMASTER 1.3 problem

About the FreeMASTER 1.3 problem

APPLE_Sam — Fri, 27 Aug 2010 10:07:54 GMT

I found a problem in FreeMASTER 1.3,

as fllow: in a Infinite loop ,after simple calculate in TEMP1 and I store TEMP1 value to TEMP2. In general TEMP1 and

TEMP1 must be have the same value, but I use FreeMASTER 1.3 to read TEMP1and TEMP2 ,it show different

Curve(value). Could anyone explain it?

for(i=0;i<=20;i++)
{
      a=a+2;
      TEMP1=(i+a);
      TEMP2=TEMP1;
      if(i=10)
      {
        i=0;
      }
      if( a==100)
      {
        a=0;
      }
}

Re: About the FreeMASTER 1.3 problem

giacomopetrini — Fri, 27 Aug 2010 19:00:49 GMT

- slow sample time

- freemaster reads the variables sequentially

Bye Giacomo

Re: About the FreeMASTER 1.3 problem

APPLE_Sam — Wed, 01 Sep 2010 16:33:35 GMT

- slow sample time

-freemaster reads the variables sequentially

thank for your reply

you mean when TEMP1 and TEMP2 are still calculating at that time,maybe TEMP1 is update but TEMP2 is not.

At that time FreeMASTER will load TEMP1 and TEMP2 ,causes TEMP1 is not equal TEMP2?