topic Re: case for ZSTAR3 sensor board in 8-bit Microcontrollers

case for ZSTAR3 sensor board

jblaschak — Fri, 16 Jan 2009 12:11:39 GMT

Hello,

I am looking for a case to hold the ZSTAR3 sensor board, so I can attach it to the object I want to
measure and have a means to protect the board.

I see in Figure 1-2 of DRM103 Designer Reference Manual, the ZSTAR3 demo suitcase
which has a number of boxes for the sensors.

How can one get some of these boxes shown in the ZSTAR3 demo suitcase?

Or, does anyone have any other ideas for a small case to hold the board?

Thank you for your help,

jblaschak

Re: case for ZSTAR3 sensor board

NLFSJ — Tue, 27 Jan 2009 01:24:57 GMT

Hi Jeff,

I know you received a reply from our technical information center. I just wanted to add it to

the forum, in case others need the same answer.

Unfortunately the case for the ZSTAR3 is not available for customers and unfortunately there is no mechanical design available to reproduce it.

We suggest designing your own case for this.

Sorry for any inconvenience this may cause you.

Regards,

Nina

Re: case for ZSTAR3 sensor board

Meister — Sat, 21 Feb 2009 00:25:36 GMT

Hi,

I designed a case for the Zstar3 and Zstar2, if someone is interested in it, please let me know.

Best regards

Re: case for ZSTAR3 sensor board

Gargy — Tue, 17 Mar 2009 17:01:35 GMT

Hello, the boxes used for ZSTAR3 are bought from Farnell eshop and type is OVO3-3.

Have a nice day