8-bit MicrocontrollersのトピックRe: P9S08SH8 have Edge-Aligned PWM Mode functional? https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211399#M18158 <HTML><HEAD></HEAD><BODY><DIV></DIV><DIV></DIV><DIV>Hello,</DIV><DIV>&nbsp;</DIV><DIV>As Peg as said its an "engineering sample" , the sample normally given out to some special customers.</DIV><DIV>&nbsp;</DIV><DIV>The difference between the normal mass produced ones and the engineering sample lies in the testing part.</DIV><DIV>&nbsp;</DIV><DIV>Here is the comment from Freescaler Ake who once gave the information regarding this.</DIV><DIV>"<DIV><BR /></DIV><BLOCKQUOTE><DIV><HR /><DIV>OK, I have got a paper describing the differences between the Auto and the Consumer/Industrial quality procedures.</DIV><DIV>&nbsp;<DIV class="O"><SPAN></SPAN><DIV><SPAN>•</SPAN></DIV><DIV>In general, FSL offers two types of qual tiers for MCUs – Auto qualification and C&amp;I qualification.<BR />• Products that follow the Auto or C&amp;I qual tier vary by both the qualification process and the production test flow that they receive.<BR />• Auto qualified parts follow a much more demanding qualification process – AEC (Automotive Electronics Council) Q100 Grade 1 qual flow.&nbsp; The AEC Q100 qual flow is an Auto standard qualification process that all of the major OEMs and Tier 1 suppliers require for nearly all of their applications.<BR />• The results of an AEC Q100 qualification are documented in a product’s PPAP (Production Part Approval Process).&nbsp;<BR />• PPAPs only exist for Auto qualified products.</DIV><DIV>&nbsp;</DIV><DIV>So I think that when exchaning the common MC with an S, the part has to go thru AEG testing.</DIV><HR /></DIV></DIV></DIV></BLOCKQUOTE><DIV>See also the link:</DIV><DIV><A href="http://forums.freescale.com/freescale/board/message?board.id=8BITCOMM&amp;message.id=12266#M12266" target="_blank">http://forums.freescale.com/freescale/board/message?board.id=8BITCOMM&amp;message.id=12266#M12266</A><BR /></DIV><DIV></DIV></DIV><DIV>&nbsp;</DIV><DIV>As far your question is considered, I would say yes, It contains both edge aligned as well as centre aligned PWM Mode. (See datasheet MC9S08SH8 MCU Series Data Sheet, Rev. 3, Page 241,242 ).</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><BR /><BR />Message Edited by Geo*** on <SPAN class="date_text">2008-12-19</SPAN> <SPAN class="time_text">08:19 AM</SPAN></BODY></HTML> Fri, 19 Dec 2008 16:16:26 GMT denny_george 2008-12-19T16:16:26Z P9S08SH8 have Edge-Aligned PWM Mode  functional? https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211396#M18155 <HTML><HEAD></HEAD><BODY><DIV> </DIV><DIV>P9S08SH8 have Edge-Aligned PWM Mode&nbsp; functional? thank you!<DIV>P What is the meaning ?<A href="http://freescale.i.lithium.com/i/smilies/16x16_smiley-sad.gif"><IMG alt=":smileysad:" class="emoticon emoticon-smileysad" src="http://freescale.i.lithium.com/i/smilies/16x16_smiley-sad.gif" title="Smiley Sad" /></A></DIV></DIV></BODY></HTML> Fri, 19 Dec 2008 00:22:19 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211396#M18155 xiaolin_gao 2008-12-19T00:22:19Z Re: P9S08SH8 have Edge-Aligned PWM Mode functional? https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211397#M18156 <HTML><HEAD></HEAD><BODY>Hello and welcome to the fora, xiaolin.gao, 你好<BR />Is this sentence a quote from somewhere?<BR />If so, where?<BR /><BR />My best guess is that this means "engineering sample".<BR />Back on HC08 parts the MC was changed to PC or (XC) for these.<BR /><BR /><DIV></DIV></BODY></HTML> Fri, 19 Dec 2008 06:52:29 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211397#M18156 peg 2008-12-19T06:52:29Z Re: P9S08SH8 have Edge-Aligned PWM Mode functional? https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211398#M18157 <HTML><HEAD></HEAD><BODY><DIV>thank you,but is there <FONT color="#017BBA">Edge-Aligned PWM Mode functional in P9s08sh8? 謝謝</FONT></DIV></BODY></HTML> Fri, 19 Dec 2008 08:37:45 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211398#M18157 xiaolin_gao 2008-12-19T08:37:45Z Re: P9S08SH8 have Edge-Aligned PWM Mode functional? https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211399#M18158 <HTML><HEAD></HEAD><BODY><DIV></DIV><DIV></DIV><DIV>Hello,</DIV><DIV>&nbsp;</DIV><DIV>As Peg as said its an "engineering sample" , the sample normally given out to some special customers.</DIV><DIV>&nbsp;</DIV><DIV>The difference between the normal mass produced ones and the engineering sample lies in the testing part.</DIV><DIV>&nbsp;</DIV><DIV>Here is the comment from Freescaler Ake who once gave the information regarding this.</DIV><DIV>"<DIV><BR /></DIV><BLOCKQUOTE><DIV><HR /><DIV>OK, I have got a paper describing the differences between the Auto and the Consumer/Industrial quality procedures.</DIV><DIV>&nbsp;<DIV class="O"><SPAN></SPAN><DIV><SPAN>•</SPAN></DIV><DIV>In general, FSL offers two types of qual tiers for MCUs – Auto qualification and C&amp;I qualification.<BR />• Products that follow the Auto or C&amp;I qual tier vary by both the qualification process and the production test flow that they receive.<BR />• Auto qualified parts follow a much more demanding qualification process – AEC (Automotive Electronics Council) Q100 Grade 1 qual flow.&nbsp; The AEC Q100 qual flow is an Auto standard qualification process that all of the major OEMs and Tier 1 suppliers require for nearly all of their applications.<BR />• The results of an AEC Q100 qualification are documented in a product’s PPAP (Production Part Approval Process).&nbsp;<BR />• PPAPs only exist for Auto qualified products.</DIV><DIV>&nbsp;</DIV><DIV>So I think that when exchaning the common MC with an S, the part has to go thru AEG testing.</DIV><HR /></DIV></DIV></DIV></BLOCKQUOTE><DIV>See also the link:</DIV><DIV><A href="http://forums.freescale.com/freescale/board/message?board.id=8BITCOMM&amp;message.id=12266#M12266" target="_blank">http://forums.freescale.com/freescale/board/message?board.id=8BITCOMM&amp;message.id=12266#M12266</A><BR /></DIV><DIV></DIV></DIV><DIV>&nbsp;</DIV><DIV>As far your question is considered, I would say yes, It contains both edge aligned as well as centre aligned PWM Mode. (See datasheet MC9S08SH8 MCU Series Data Sheet, Rev. 3, Page 241,242 ).</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><BR /><BR />Message Edited by Geo*** on <SPAN class="date_text">2008-12-19</SPAN> <SPAN class="time_text">08:19 AM</SPAN></BODY></HTML> Fri, 19 Dec 2008 16:16:26 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211399#M18158 denny_george 2008-12-19T16:16:26Z Re: P9S08SH8 have Edge-Aligned PWM Mode functional? https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211400#M18159 <HTML><HEAD></HEAD><BODY><DIV>thank you very much!<IMG alt=":smileywink:" class="emoticon emoticon-smileywink" id="smileywink" src="http://freescale.i.lithium.com/i/smilies/16x16_smiley-wink.gif" title="Smiley Wink" /></DIV></BODY></HTML> Fri, 19 Dec 2008 18:24:16 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/P9S08SH8-have-Edge-Aligned-PWM-Mode-functional/m-p/211400#M18159 xiaolin_gao 2008-12-19T18:24:16Z