68HC11 test mode problem

gauri_mahajan — Fri, 30 Mar 2007 16:48:49 GMT

Hi,

We are working on 68HC11E9 processor. We are using the processor in expanded mode. We faced some issues related to ROMON. So we have added the test mode code in our firmware. We put the chip in test mode when we doubt the ROMON bit. But surprisingly, the CPU is executing this test mode code sometimes when its wired for normal mode operation. This is observed at power off/on and randomly also. Sometimes the device is working okay in normal mode. When it is switched off and on , it hangs. Sometimes when the device is working okay in normal mode, suddenly it goes to test mode and hangs. We have written one data in NVM when the device executes test mode code. From this we are able to see that it is going in test mode.

Can anybody help in this?

Thanks in advance!

Gauri

Re: 68HC11 test mode problem

sureshkumar — Fri, 13 Apr 2007 11:48:05 GMT

Are you sure you can run your own code in Test Mode . As I know this mode is used by Freescale(for. Motorola). Becareful when altering the ROMON bit, this can lead your machine malfunction. Look at datasheet and it wil show you that TEST MODE is belong to Freescale or Motorola during device testing when production.

8-bit Microcontrollers中的主题 Re: 68HC11 test mode problem

68HC11 test mode problem

Re: 68HC11 test mode problem