Registartion of CodeWarrior

rapa — Sun, 26 Oct 2008 21:09:56 GMT

Hi.

I started tu use CodeWarrior Special edition for HC(S)08.In my projects i have used I2C protocols.After month of using,i started to get too much warrnings.At first i didn't paid attention,but then i saw,than because of my CodeWarrior is after 30-days, IDE doesn't generates code for driver I2C.

Somebody knows,what is the problem?

Re: Registartion of CodeWarrior

CrasyCat — Mon, 27 Oct 2008 11:01:13 GMT

Hello

There could be 2 problems here

1- If you are using Processor Expert and the InternelI2C bean

InternalI2C bean is only available in professional edition so after 1 month (when your

temporary license expires) you will not be able to get CodeWarrior to generate code for your I2C

You need to purchase a professional license of CodeWarrior for MCU V6.2 if you want the

IDE to be able to generate code again.

Alternatively you can disconnect ProcessorExpert from your project and keep the latest source files

which have been generated or modify them manually.

2- You exceeded the size of the special edition limitation

If your application is bigger than 32K, you have exceeded the limitation of the special edition

software package.

If this is the case, you need to upgrade to either a basic edition, standard edition or a professional

edition software.

Please refer to our Web page for more info on limitation of the various editions:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=CW-MICROCONTROLLERS

CrasyCat

Re: Registartion of CodeWarrior

rapa — Mon, 27 Oct 2008 19:47:28 GMT

Thanks a lot.

You have answered exactly.My problem was first(1) in your list.

8-bit MicrocontrollersのトピックRegistartion of CodeWarrior

Registartion of CodeWarrior

Re: Registartion of CodeWarrior

Re: Registartion of CodeWarrior