8-bit MicrocontrollersのトピックRe: SOIC or DIP format microcontroller with CAN

SOIC or DIP format microcontroller with CAN

imurphy — Wed, 01 Jul 2009 22:30:57 GMT

Hi,

Is there a Freescale 8 or 16bit microcontroller with CAN available in a SOIC or DIP package?

Thanks, Ian

Re: SOIC or DIP format microcontroller with CAN

OmarAI — Thu, 02 Jul 2009 18:05:20 GMT

Try a parametric search. Go to Products-->Parametric Search (just above 8-bit Microcontrollers). There you can look for anything you want, including "Package Description and Diagram" (SOIC or DIP) and "Serial Interface-Type" (CAN).

Regards.

Re: SOIC or DIP format microcontroller with CAN

imurphy — Thu, 02 Jul 2009 18:52:34 GMT

Sorry, but that doesn't work. I tried that before posting.

There is no parametric search filter option for 'Package Description and Diagram' for the 8-bit devices.

Regards, Ian

Re: SOIC or DIP format microcontroller with CAN

OmarAI — Fri, 03 Jul 2009 02:19:19 GMT

Try the non-flash version. I used it this morning, before replying to you and it worked just fine. It has more options than the flash version. There's a link situated above the search box of the flash version to switch between them.

This is the link for the non-flash version. Then, click on Advance parametric search in the filters section and you will find lots of filters, including package and serial interface.

This link will guide you directly

http://www.freescale.com/webapp/search/MainSERP.jsp?SelectedAsset=Product Pages&nonFlash=true

Re: SOIC or DIP format microcontroller with CAN

imurphy — Fri, 03 Jul 2009 04:23:48 GMT

Thanks, that works.

Unfortunately the answer to my query seems to be 'no'.

Regards, Ian

Re: SOIC or DIP format microcontroller with CAN

OmarAI — Fri, 03 Jul 2009 09:33:37 GMT

Glad I helped, sorry about your misfortune.

Regards.

Re: SOIC or DIP format microcontroller with CAN

kef — Fri, 03 Jul 2009 13:45:44 GMT

Ian,

is 0.8mm pitch 32lead QFP much worse than SOIC? If it isn't, then please consider MC9SDZ and MC9SDV MCUs. DZ and DV derivatives with up to 60k flash are available in 32pins QFP. 96 and 128k aren't available in such package.

Re: SOIC or DIP format microcontroller with CAN

imurphy — Fri, 03 Jul 2009 15:12:22 GMT

SOIC is 1.27mm lead pitch and that's about the limit for my soldering by hand and for a cheap single-layer PCB design where you might want to route out between the processor pins. Also with SOIC or DIP you can route out the end of the chip, not possible with a quad pack.

I'd rather spend the $40 for a TechArts NanoCore12C32 than try to design for a 0.8mm QFP.

Regards, Ian