topic Re: RS08 KA2 programmig fails in 8-bit Microcontrollers

RS08 KA2 programmig fails

jaluna — Mon, 23 Jul 2012 17:00:05 GMT

Hello all!

our two units of Cyclone Pro (Rev. C, version 8.47-1.1) are unable to program the RS08 KA2 devices.

We have tried three ways:

- from the debugger (Verification step (VM) fails)

- using the stand-alone way (Cyclone says Error 1003, Blank check fails)

- using the RS08 Programmer (the same problem, see video) http://dl.dropbox.com/u/39961328/KA2.rar

Have some people noticed this problem or know the solution? (I already have asked support to PE micro without any solution)

Thank you.

Regards,

Juan A Luna

J2MEJediMaster — Mon, 23 Jul 2012 20:02:10 GMT

Did these run controllers use to work? If so, what changed just before they stopped working?

If they never worked, then they need a driver installed. You can obtain the latest drivers from the P&E Microsystems web site.

---Tom

jaluna — Mon, 23 Jul 2012 20:14:20 GMT

Hello Tom,

we have changed the part and now seems to work fine. Thanks anyway.

Regards,

Juan A Luna