topic Re: How to trace interrupts in Code Warrior for HC08 v5.1 in 8-bit Microcontrollers https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-trace-interrupts-in-Code-Warrior-for-HC08-v5-1/m-p/124018#M130 <HTML><HEAD></HEAD><BODY><DIV>Locate your interrupt jump vector table.&nbsp; I don't know how you have set yours up, however you might want to look into mcu_init.c.. you can see from the jump table, the names of the different interrupt routines and you can set a breakpoint in the routine you are looking for.</DIV><DIV>&nbsp;</DIV><DIV>An easier way might be to make a file called isr.c and include your interrupt jump table there as well as all the interrupt service routines you want.</DIV><DIV>&nbsp;</DIV><DIV>Bud</DIV></BODY></HTML> Fri, 14 Jul 2006 09:59:21 GMT Bud 2006-07-14T09:59:21Z How to trace interrupts in Code Warrior for HC08  v5.1 https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-trace-interrupts-in-Code-Warrior-for-HC08-v5-1/m-p/124017#M129 <HTML><HEAD></HEAD><BODY><DIV>Dear all,</DIV><DIV>&nbsp;</DIV><DIV>I&nbsp;am debugging&nbsp;Code Warrior 5.0 for HC08 program. If anybody know how to trace interrupt functions in Code Warrior, please help me.</DIV><DIV>&nbsp;</DIV><DIV>Thanks so much.</DIV><DIV>&nbsp;</DIV><DIV>Tu Pham.</DIV></BODY></HTML> Fri, 14 Jul 2006 09:53:58 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-trace-interrupts-in-Code-Warrior-for-HC08-v5-1/m-p/124017#M129 tupham 2006-07-14T09:53:58Z Re: How to trace interrupts in Code Warrior for HC08 v5.1 https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-trace-interrupts-in-Code-Warrior-for-HC08-v5-1/m-p/124018#M130 <HTML><HEAD></HEAD><BODY><DIV>Locate your interrupt jump vector table.&nbsp; I don't know how you have set yours up, however you might want to look into mcu_init.c.. you can see from the jump table, the names of the different interrupt routines and you can set a breakpoint in the routine you are looking for.</DIV><DIV>&nbsp;</DIV><DIV>An easier way might be to make a file called isr.c and include your interrupt jump table there as well as all the interrupt service routines you want.</DIV><DIV>&nbsp;</DIV><DIV>Bud</DIV></BODY></HTML> Fri, 14 Jul 2006 09:59:21 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/How-to-trace-interrupts-in-Code-Warrior-for-HC08-v5-1/m-p/124018#M130 Bud 2006-07-14T09:59:21Z