topic zigbee 13213 sent massege to end device in 8-bit Microcontrollers

zigbee 13213 sent massege to end device

moti — Sun, 30 Dec 2007 03:42:18 GMT

Hi,

Im using 13213 EVK and tring to send data\maseges via uart to the coordinator and to the end device. im reading the 802154MSNAUG file - 2.1.7 Sending Data to the End Devices

but wuthout success

Do somebody know how to do it -please connect and advice.

Thank you,

Re: zigbee 13213 sent massege to end device

Mads — Mon, 07 Jan 2008 16:06:31 GMT

Moti,

Try programming MyWirelessApp example 5a and b, or 6a and b into 2 boards.

The MyStarNetworkDemo also does the same thing.

Note if you are using low power mode, then try to disconnect the debugger.

Both application set does what you request.

BR,

Mads