topic mc68hc908gp32 init error in 8-bit Microcontrollers https://community.nxp.com/t5/8-bit-Microcontrollers/mc68hc908gp32-init-error/m-p/168833#M11116 <HTML><HEAD></HEAD><BODY><DIV>Hi, it is not the first time i am burning a gp32 but it is the first time with this new pcb and the first time on the computer i am using for the task. I do it with ide codewarrior. At the moment, there is nothing in the program, i am just trying to enter monitor mode. After&nbsp; codewarrior ask me if i want to erase the flash memory and i answer yes, the following error happens: --initializing&nbsp; unable to access processor</DIV><DIV>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; error 35 during script</DIV><DIV>&nbsp;</DIV><DIV>Thank you for reading this.</DIV><DIV>&nbsp;</DIV><DIV>Olivier Allaire</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV></BODY></HTML> Mon, 30 Jun 2008 00:11:39 GMT olivier_quebec 2008-06-30T00:11:39Z mc68hc908gp32 init error https://community.nxp.com/t5/8-bit-Microcontrollers/mc68hc908gp32-init-error/m-p/168833#M11116 <HTML><HEAD></HEAD><BODY><DIV>Hi, it is not the first time i am burning a gp32 but it is the first time with this new pcb and the first time on the computer i am using for the task. I do it with ide codewarrior. At the moment, there is nothing in the program, i am just trying to enter monitor mode. After&nbsp; codewarrior ask me if i want to erase the flash memory and i answer yes, the following error happens: --initializing&nbsp; unable to access processor</DIV><DIV>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; error 35 during script</DIV><DIV>&nbsp;</DIV><DIV>Thank you for reading this.</DIV><DIV>&nbsp;</DIV><DIV>Olivier Allaire</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV></BODY></HTML> Mon, 30 Jun 2008 00:11:39 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/mc68hc908gp32-init-error/m-p/168833#M11116 olivier_quebec 2008-06-30T00:11:39Z Re: mc68hc908gp32 init error https://community.nxp.com/t5/8-bit-Microcontrollers/mc68hc908gp32-init-error/m-p/168834#M11117 <HTML><HEAD></HEAD><BODY>Hello Olivier and welcome to the fora.<BR /><BR />So you get past the initial connection dialogue but then get stuck when it tries to erase. Is this correct?<BR />What MON08 adapter are you using? What class is it?<BR />Are you using a "real" serial port on your computer or a USB adapter or someting?<BR />Perhaps try going into "Expert mode" where you can try a few other things to see what happens.<BR /><BR /><DIV></DIV></BODY></HTML> Mon, 30 Jun 2008 06:56:21 GMT https://community.nxp.com/t5/8-bit-Microcontrollers/mc68hc908gp32-init-error/m-p/168834#M11117 peg 2008-06-30T06:56:21Z