topic Re: Cyclone Pro expansion Port ? in S12 / MagniV Microcontrollers

Cyclone Pro expansion Port ?

adelantesey — Sun, 30 Jun 2013 06:29:03 GMT

Dear,

I've a Cyclone Pro programmer and I'm using it in production line but the switches on this programmer are weak and get broken once in a while. I want to use the Expansion port at the bottom of device, but I couldn't find any specification for it!! How can I use this port to control the programmer without using it's onboard switches?

Thanks a lot

Re: Cyclone Pro expansion Port ?

RadekS — Thu, 04 Jul 2013 13:00:28 GMT

Unfortunately I also didn’t found any information about “Expansion port at the bottom of device”.

I asked PEmicro (author of CyclonePro programmer) for help with your question.

Now I am waiting for reply.

Please be patient.

Re: Cyclone Pro expansion Port ?

RadekS — Tue, 09 Jul 2013 15:44:02 GMT

Reply from PEmicro:

The Expansion port of Cyclones is not implemented.

User can use our DLL to control the Cyclone (via RS232, USB or Ethernet) instead of the control/expansion port.

http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320101