topic Re: Cannot write to EEPROM by using DATA_SEG definition in S12 / MagniV Microcontrollers

Cannot write to EEPROM by using DATA_SEG definition

Allem77 — Mon, 05 Mar 2012 19:37:12 GMT

Hello,

I m trying to write a value in the EEPROM at the address 0xFC0800. It functions with the following code:

/* Definition */
uint16 u16_bootloaderFlag @ 0xFC0800;

/* changing the value */
u16_bootloaderFlag = 0xABCD;

But the following code won't work:

/* prm file */
...
EEPROM_FC_BOOT = READ_ONLY DATA_FAR IBCC_FAR 0xFC0800 TO 0xFC081F; /* 32 Bytes used for the bootloader variables */
...

/* Definition in .c the file*/
#pragma DATA_SEG BOOTLOADER_FLAG
uint16 u16_bootloaderFlag; /* Located in the banked EEEPROM see .prm file */
#pragma DATA_SEG DEFAULT

/* changing the value */
u16_bootloaderFlag = 0xABCD;

After this line, the bootloaderFlag is equal to 0. By the way, the map file confirms me that the u16_bootloaderFlag variable is located at 0xFC0800.

Am I missing something in the declaration of the prm file to get write access?

Thanks for your help!

PS: uC = HCS12X

Re: Cannot write to EEPROM by using DATA_SEG definition

sebasira — Mon, 05 Mar 2012 20:45:53 GMT

Hello Allem77!

EEPROM is non-valotile memory and In order to write/erase it you need special routines.... Some tips:

- An EEPROM address is erased when its value is 0xFF

- In order to re-write EEPROM, you first need to erased it and then write the new value.

- You should also know that it is dword aligned (4bytes) and that's the minimmun erase size... If you're trying to erase a single byte, the other 3bytes from that "block" would also be erased. See the next graphic:

4bytes 4bytes

+---------------+---------------+

| x | x | x | x | x | x | x | x |

If tryng to erase this byte, the other from the same block would also be erased

4bytes 4bytes

+---------------------------+---------------+

| 0xFF | 0xFF | 0xFF | 0xFF | x | x | x | x |

Take a look at page 1039 for 2k EEPROM or page 1073 for 4k EEPROM, from MC9S12XD family reference manual. And you may also find some examples routines.

Best Regards!

Re: Cannot write to EEPROM by using DATA_SEG definition

Allem77 — Mon, 05 Mar 2012 21:39:56 GMT

Thank you for the fast answer!