EVB9S12NE64 hyperterminal settings

Ed22 — Sat, 28 Jun 2008 08:29:57 GMT

Hi,

I've got an Axiom EVB9S12NE64, and I wish to communicate with the serial monitor, using HyperTerminal. What are the correct settings for baud rate, parity, data bits, stop bits and flow control? I can't find the information anywhere on the included documentation. Thank you.

Re: EVB9S12NE64 hyperterminal settings

UK_CF_FAE — Wed, 02 Jul 2008 03:29:48 GMT

Hi Ed22,

It has been a real long time since I used the NE64, but going back to a project that I had:

ne64debug.c:

//===================================================
void InitDebug(void)
{

#define BAUD_RATE 115200

#define BAUD_DIV ECLK/16/BAUD_RATE

SCIBD= BAUD_DIV;
SCICR1= 0;
SCICR2= SCI1CR2_TE_MASK | SCI1CR2_RE_MASK | SCI1CR2_RWU_MASK ;
}

I'd go for 115200 8N1 No flow control. Sometimes, though, you just have to make a few guesses.

No doubt, you will let us all know how you get on.

Mark

S12 / MagniV MicrocontrollersのトピックEVB9S12NE64 hyperterminal settings

EVB9S12NE64 hyperterminal settings

Re: EVB9S12NE64 hyperterminal settings