topic Reg. MC9S12DJ64 Controller Programing in S12 / MagniV Microcontrollers

Reg. MC9S12DJ64 Controller Programing

balajiprabhakar — Wed, 14 Nov 2007 13:47:38 GMT

Hi all,

I am using MC9S12DJ64 controller, but I am not sure of which pins must be used to program the controller.

Can anyone help me out.

With regards,

Balaji.

Re: Reg. MC9S12DJ64 Controller Programing

Lundin — Wed, 14 Nov 2007 15:28:30 GMT

The BKGD pin is the only one needed, though the BDM pod will want to use the reset line too. And of course a signal ground.

Both the BKGD and the reset line need a pull-up of 10k or so.

Re: Reg. MC9S12DJ64 Controller Programing

balajiprabhakar — Wed, 14 Nov 2007 16:21:26 GMT

Thanks Lundin,

Can I use Multilink programer for programing the controller. If so can you please give me the pin details of the same.

with regards,

Balaji.

Re: Reg. MC9S12DJ64 Controller Programing

Lundin — Fri, 16 Nov 2007 15:17:55 GMT

The pinning is available in both the Multilink manual and the S12 manual.