S12 / MagniV MicrocontrollersのトピックRe: DSP56F800 - USB interface JTAG programmers

DSP56F800 - USB interface JTAG programmers

Devendra — Mon, 15 Oct 2007 18:59:11 GMT

We are currently using Parallel port (25-pin) to JTAG (10-pin) interface for programming DSP56F800 and MC56F8300 series controllers.

I would like to know if there is any USB interfaced JTAG programmer, because modern day Laptops don't have a parallel port.

Any converter for USB to Parallel port should work for this? There are some converters available which emulate a parallel port through a coverter hardware and some device driver installed in the PC.

Please reply ASAP.

Thanks and Best Regards,

Devendra

--
Alban Edit: Please always include FSL Part Number in Message Subject line.
http://forums.freescale.com/freescale/board/message?board.id=FORUMUSE&message.id=865

Message Edited by Alban on 2007-10-15 02:23 PM

Re: DSP56F800 - USB interface JTAG programmers

Cowboy — Mon, 15 Oct 2007 20:55:59 GMT

Hi Devendra

Here are some sites that you can order from.

http://www.tigerdirect.com/applications/Category/category_slc.asp?CatId=471

http://www.roalan.com/USB%20to%20Parallel%20Printer%20Converter.htm

I havend tested one of these, but I'm pretty sure they will work

Re: DSP56F800 - USB interface JTAG programmers

Cowboy — Mon, 15 Oct 2007 20:59:21 GMT

If you want to build one yourself

http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20den%20PC/USB2LPT/ul-12.htm.en