topic Re: Programming Certification in S12 / MagniV Microcontrollers

Programming Certification

gabryray — Thu, 15 Feb 2007 21:11:08 GMT

Hi, I'm developing a software for MC9S12XDT512 Flash-EEprom programming and I need to obtain a FreeScale quality certificate but I don't know which is the procedure. Samebody can help me?

Thanks in advance....

ps: I'm sorry for my bad english, I'm Italian.

Re: Programming Certification

Alban — Thu, 15 Feb 2007 22:17:52 GMT

Hello,

What kind of Quality Certificate do you need ?

Cheers,

Alban.

Re: Programming Certification

gabryray — Thu, 15 Feb 2007 22:33:45 GMT

Hi, I need to Obtain an Assessment that certificate the quality of my programmer because my customer request a certificate of quality. Thanks

Re: Programming Certification

Alban — Thu, 15 Feb 2007 22:42:19 GMT

Ok, I see,

Which programmer are you using ?

Which kind of certificate ? I ask because Quality is at every level.

Alban.

Re: Programming Certification

gabryray — Thu, 15 Feb 2007 22:49:41 GMT

I work for SPEA (www.spea.net) and I use an ON BORD PROGRAMMER developed by SPEA and I need a certificate that attest that the component is fine programmed with OUR hardware and software.

thanks

Re: Programming Certification

Alban — Thu, 15 Feb 2007 23:02:17 GMT

Hello and thanks for the details.

This kind of Certificate would have to be obtained from the manufacturer.

Only them know how they implemented Flash programming in their product.

I found a contact at SPEA. They own the Intellectual Property of the module and FSL is not supposed to know what they did.

Good Luck,

Alban.