topic Re: Disconnecting with OpenTCP in S12 / MagniV Microcontrollers https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Disconnecting-with-OpenTCP/m-p/143842#M3617 <HTML><HEAD></HEAD><BODY>In general, this is normal for TCP.<BR /><BR />Usually it is longer than this - its called linger and it is to allow any stray packets on the net to arrive so that the local port number does not get reused and receive packets from the previous connection. Usually there is an option to turn it off NO_LINGER, but you shouldn't - its there for a reason.</BODY></HTML> Sat, 03 Feb 2007 07:31:59 GMT JimDon 2007-02-03T07:31:59Z Disconnecting with OpenTCP https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Disconnecting-with-OpenTCP/m-p/143841#M3616 <HTML><HEAD></HEAD><BODY><DIV>&nbsp;</DIV><DIV>Hi, I develop an application with NE64 and OpenTCP. I just connect from a PC, NE64 sends data and PC close the connection but NE64&nbsp;don't close connection immediately. It took about 2-3 seconds in close the connection by timeout. It's normal?</DIV><DIV>&nbsp;</DIV><DIV>Can anyone help me ?</DIV><DIV>&nbsp;</DIV><DIV>Victor</DIV></BODY></HTML> Mon, 29 Jan 2007 19:49:27 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Disconnecting-with-OpenTCP/m-p/143841#M3616 Victor125 2007-01-29T19:49:27Z Re: Disconnecting with OpenTCP https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Disconnecting-with-OpenTCP/m-p/143842#M3617 <HTML><HEAD></HEAD><BODY>In general, this is normal for TCP.<BR /><BR />Usually it is longer than this - its called linger and it is to allow any stray packets on the net to arrive so that the local port number does not get reused and receive packets from the previous connection. Usually there is an option to turn it off NO_LINGER, but you shouldn't - its there for a reason.</BODY></HTML> Sat, 03 Feb 2007 07:31:59 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Disconnecting-with-OpenTCP/m-p/143842#M3617 JimDon 2007-02-03T07:31:59Z