S12 / MagniV Microcontrollersのトピックprogrammig micros https://community.nxp.com/t5/S12-MagniV-Microcontrollers/programmig-micros/m-p/135453#M2272 <HTML><HEAD></HEAD><BODY><DIV> </DIV><DIV>hi, all</DIV><DIV>i'm new in this area.</DIV><DIV>anybody can tell me how to get amateur information about programming micros</DIV></BODY></HTML> Fri, 01 Jun 2007 08:44:20 GMT ledar 2007-06-01T08:44:20Z programmig micros https://community.nxp.com/t5/S12-MagniV-Microcontrollers/programmig-micros/m-p/135453#M2272 <HTML><HEAD></HEAD><BODY><DIV> </DIV><DIV>hi, all</DIV><DIV>i'm new in this area.</DIV><DIV>anybody can tell me how to get amateur information about programming micros</DIV></BODY></HTML> Fri, 01 Jun 2007 08:44:20 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/programmig-micros/m-p/135453#M2272 ledar 2007-06-01T08:44:20Z Re: programmig micros https://community.nxp.com/t5/S12-MagniV-Microcontrollers/programmig-micros/m-p/135454#M2273 <HTML><HEAD></HEAD><BODY>Hello,<BR /><BR />I see two things:<BR />- Program for the micros and<BR />- Program the micros with the software.<BR /><BR />For the first, I would suggest the numerous trainings available.<BR />You have online trainings describing the architecture and modules.<BR /><BR />For the second, you need an interface between the computer and MCU=µc.<BR />On the HC12, S12, S12X, the 'protocol' is called BDM (Background Debug Module), this comes from the name of the communication module in the micro.<BR />To make a chip debug cable, look at our TBDML board on this forum.<BR />To buy one, you have many options.<BR /><BR />Alban.<BR /><DIV></DIV></BODY></HTML> Fri, 01 Jun 2007 15:25:17 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/programmig-micros/m-p/135454#M2273 Alban 2007-06-01T15:25:17Z