topic Re: PP4/PW4 pin in S12 / MagniV Microcontrollers

PP4/PW4 pin

P0zburn — Thu, 02 Jan 2025 16:54:25 GMT

Hello newbie here,

I'm looking at a mc9s12gc (52 pin) on HVAC board and noticed that a Thermostat(Basically a potentiometer) what I would think should be tied to an input pin is wired to the PP4/PW4 pin. Can the PW4 pin be configured as an input? Everything I've read says it is a Pulse width modulated waveform output.

I know most thermostats are just open/closed contacts but this one is not.

Thanks

Re: PP4/PW4 pin

danielmartynek — Fri, 03 Jan 2025 08:50:22 GMT

Hello @P0zburn,

The PP4/PW4 pin is a GPIO.

The direction is configurable in the DDRP register.

Re: PP4/PW4 pin

P0zburn — Fri, 03 Jan 2025 18:56:07 GMT

Thanks for the response. I have a follow up question. Once it is configured as an input, can it be used as a analog input?

Re: PP4/PW4 pin

danielmartynek — Sun, 05 Jan 2025 21:25:51 GMT

Hi @P0zburn,

This is not an ATD (ADC) pin, it can be a digital input only.

Best regards,

Daniel