topic Re: Lin Error in S12 / MagniV Microcontrollers

Lin Error

itsnewforme — Wed, 23 Nov 2022 06:34:58 GMT

Hii Team,

Here there are two LIN frames : ID 31 - Request Frame , ID 33 - Response Frame

I'm able to send the Lin Request frame from CANoe and I'm getting the proper response frame from S12 ECU.

But, while transmitting the frame from CANoe it is showing some error. Please see the attached Image.

I want to know why it is showing and how to resolve this.

Thanks & Regards

Re: Lin Error

danielmartynek — Thu, 24 Nov 2022 11:57:49 GMT

Hi @itsnewforme,

Can you scope the LIN bus?

Thanks,

Daniel

Re: Lin Error

itsnewforme — Fri, 25 Nov 2022 11:25:32 GMT

Okay, But I think the issue is from the ECU side. Because when I disable the response frame from the ECU code, there is so such errors visible on CANoe,

Additionally I'm able to clear the unexpected break while waiting for checksum field error, by adding the delay in ECU code as show below

Now, I'm just getting the framing error while waiting for checksum field error. Is there any way to solve this

Thanks in advance

Re: Lin Error

danielmartynek — Wed, 30 Nov 2022 12:32:51 GMT

Hello @itsnewforme,

I think that it would help to see the frames on an oscilloscope.

I understand you don't use NXP LIN Stack, it is your own implementation, right?

Which S12 MCU do you have?

Regadrs,

Daniel

Re: Lin Error

itsnewforme — Wed, 30 Nov 2022 12:43:19 GMT

Okay. I'll scope it.

Yes Its own implementation , we have used ZVML Bootloader code for reference LINK

https://www.nxp.com/docs/en/application-note-software/AN12086SW.ZIP

We are using ZVML64 MCU.

Thanks