https://community.nxp.com/t5/S12-MagniV-Microcontrollers/CW-for-MCU-S12Z/m-p/1322462#M18065 <P>Hello Radu,</P> <P>I suggest you to use the latest CW11.1 version which supports S12Z and other MCU families too:</P> <P><A href="https://www.nxp.com/design/software/development-software/codewarrior-development-tools/codewarrior-legacy/codewarrior-development-suite-special:CW-SUITE-SPECIAL?tab=Design_Tools_Tab" target="_blank">https://www.nxp.com/design/software/development-software/codewarrior-development-tools/codewarrior-legacy/codewarrior-development-suite-special:CW-SUITE-SPECIAL?tab=Design_Tools_Tab</A></P> <P>You can use the Universal Multilink tool for load and debug your application SW:</P> <P><A href="https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320180&amp;productTab=1" target="_blank">https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320180&amp;productTab=1</A></P> <P>I whish you many success in your work.</P> <P>Best Regards,</P> <P>Stano.</P> Thu, 12 Aug 2021 07:40:58 GMT StanoA 2021-08-12T07:40:58Z https://community.nxp.com/t5/S12-MagniV-Microcontrollers/CW-for-MCU-S12Z/m-p/1322003#M18064 <P>Hello,</P><P>I have the license for CodeWarrior for Microcontrollers (RS08HC (S) 08-ColdFire V1) v6.3 (32 bit). I would like an upgrade to be able to work in Windows 10 (64 bit) with MCU from the S12Z family. How can I proceed?</P><P>Thanks!</P><P>Radu</P> Wed, 11 Aug 2021 15:53:01 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/CW-for-MCU-S12Z/m-p/1322003#M18064 radudrosescu 2021-08-11T15:53:01Z https://community.nxp.com/t5/S12-MagniV-Microcontrollers/CW-for-MCU-S12Z/m-p/1322462#M18065 <P>Hello Radu,</P> <P>I suggest you to use the latest CW11.1 version which supports S12Z and other MCU families too:</P> <P><A href="https://www.nxp.com/design/software/development-software/codewarrior-development-tools/codewarrior-legacy/codewarrior-development-suite-special:CW-SUITE-SPECIAL?tab=Design_Tools_Tab" target="_blank">https://www.nxp.com/design/software/development-software/codewarrior-development-tools/codewarrior-legacy/codewarrior-development-suite-special:CW-SUITE-SPECIAL?tab=Design_Tools_Tab</A></P> <P>You can use the Universal Multilink tool for load and debug your application SW:</P> <P><A href="https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320180&amp;productTab=1" target="_blank">https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320180&amp;productTab=1</A></P> <P>I whish you many success in your work.</P> <P>Best Regards,</P> <P>Stano.</P> Thu, 12 Aug 2021 07:40:58 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/CW-for-MCU-S12Z/m-p/1322462#M18065 StanoA 2021-08-12T07:40:58Z