S12 / MagniV MicrocontrollersのトピックFlash Programer for S12 series

Flash Programer for S12 series

YANG-NMOG — Mon, 30 Nov 2020 03:48:29 GMT

Hello:

I am a engineer in the factory in China, we need to produce a new manufacture with use the MCU of S912ZVM.

For my job,I need to design a new automation-machine to do this. Could I get some advice of which Flash Programer can be used in my automation-machine?

I need to design a software to PC to control the Flash Programer for the automation-chine.

So I need the Flash Progarmer have the API or SDK or other some thing to control

I think is U-MULTILINK-FX,but not sure.

Thank you !

Re: Flash Programer for S12 series

ArchieLuo — Tue, 01 Dec 2020 02:19:56 GMT

可以使用Cyclone LC 或者 Cyclone FX，这两个工具是可以脱机烧录的，一般量产都会用这个工具。

U-MULTILINK-FX只是个调试器，必须连电脑使用。

可以使用PROGS12ZZ这个软件，搭配下载器使用。

如有疑问可以联系我~

Re: Flash Programer for S12 series

dianabatrlova — Wed, 02 Dec 2020 08:43:08 GMT

Hello,

Since we have no solution for mass production such as stand-alone programmers, you have to turn to third-party products.

I can confirm the information posted by lsssssssssss.

You can use PEmicro’s USB Multilink Universal FX

http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320143&productTab=1

"NOTE: For production usage, see the Cyclone LC and Cyclone FX stand-alone programmer, test & debug interfaces."

You can also look at the list of PE micro products for more details about the available debug probes/ flash programmers, see http://www.pemicro.com/products/product_processor.cfm

Best regards,

Diana

Re: Flash Programer for S12 series

YANG-NMOG — Tue, 08 Dec 2020 00:39:37 GMT

谢谢您的回复！