topic Re: PI parameter of MC9S12ZVML128_PMSM_Sensorlessuse in S12 / MagniV Microcontrollers

PI parameter of MC9S12ZVML128_PMSM_Sensorlessuse

zhoumaokang — Mon, 15 Apr 2019 06:18:34 GMT

Hello,I download MC9S12ZVML128_PMSM_Sensorlessuse and user my own motor, and modify the parameters in the software.but the speed is wrong in open loop mode，I think it is the reason for the PI parameter, but I don't know the tuning principle of the PI parameter. I think the bandwidth and attenuation settings are wrong, but I don't know how to solve it.How can I do?

Re: PI parameter of MC9S12ZVML128_PMSM_Sensorlessuse

pachamatej — Tue, 23 Apr 2019 05:09:03 GMT

Hello,

First of all, the Excel you have shared is obsolete tool, already replaced by MCAT (FreeMASTER-integrated web-based interface with control page and all the settings).

If the motor speed is wrong even in open loop mode, there are two possible reasons:

the motor pole-pair number is not correct
the algorithm timing is wrong, which usually happens when
- CPU clock is set differently from the original software
- ADC-done or PMF-reload interrupt timing is set differently (e.g. number of reload opportunities, PMF modulus, reorganized ADC triggers)

What is the "wrong" speed in relation to the real speed?

Best regards,

Matej

Re: PI parameter of MC9S12ZVML128_PMSM_Sensorlessuse

zhoumaokang — Mon, 06 May 2019 12:31:38 GMT

OK！Thanks！！best wish！