S12 / MagniV Microcontrollersのトピック How use LDF/NPF to config 2ch LIN https://community.nxp.com/t5/S12-MagniV-Microcontrollers/How-use-LDF-NPF-to-config-2ch-LIN/m-p/869262#M16254 <HTML><HEAD></HEAD><BODY><P>I use LDF/NPF to config 2ch LIN by SCI0/SCI1. I need config 2ch LIN with slave mode. But after generate the lin.h/lin.c，I found the mode in lin.h is master（#define LIN_MODE&nbsp; &nbsp;_MASTER_MODE_ ）。 And the mode is slave（<SPAN>#define LIN_MODE&nbsp; &nbsp;_SLAVE_MODE_</SPAN>） when I config 1ch LIN.</P><P>See the attachment for details of the configuration picture.</P><P>The LIN.c have same variable and&nbsp;prompt error during&nbsp; compile.</P></BODY></HTML> Mon, 18 Feb 2019 09:27:04 GMT simonliu 2019-02-18T09:27:04Z How use LDF/NPF to config 2ch LIN https://community.nxp.com/t5/S12-MagniV-Microcontrollers/How-use-LDF-NPF-to-config-2ch-LIN/m-p/869262#M16254 <HTML><HEAD></HEAD><BODY><P>I use LDF/NPF to config 2ch LIN by SCI0/SCI1. I need config 2ch LIN with slave mode. But after generate the lin.h/lin.c，I found the mode in lin.h is master（#define LIN_MODE&nbsp; &nbsp;_MASTER_MODE_ ）。 And the mode is slave（<SPAN>#define LIN_MODE&nbsp; &nbsp;_SLAVE_MODE_</SPAN>） when I config 1ch LIN.</P><P>See the attachment for details of the configuration picture.</P><P>The LIN.c have same variable and&nbsp;prompt error during&nbsp; compile.</P></BODY></HTML> Mon, 18 Feb 2019 09:27:04 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/How-use-LDF-NPF-to-config-2ch-LIN/m-p/869262#M16254 simonliu 2019-02-18T09:27:04Z