S12 / MagniV Microcontrollers中的主题 MCAL layer for S12 MCU

MCAL layer for S12 MCU

manjunathan — Wed, 08 Nov 2017 12:12:48 GMT

I am Manjunath. Am using S12 MCU in my automotive project which involves AUTOSAR architecture. So I need MCAL layer for the MCS12 MCU (S9S12G192F0CLL). I searched the package in NXP downloads and the only package available is for MPC family of microcontrollers. Can we use the same package for S12 family also, if it is, how to open the downloaded package as it is asking for the password. Or if seperate package is available for S12 family of micrcontrollers, how to download the package, Is it free of cost and how to get the password to open the package? Please suggest me the procedure to get the MCAL package for S12 MCU.

Re: MCAL layer for S12 MCU

VBZ — Thu, 16 Nov 2017 13:33:39 GMT

Thank you for your interest in NXP platforms and software products.

The NXP MCAL package contain low-level drivers controlling directly the hardware peripherals present on each micro-controller. This means that a MCAL package for processor A cannot be used as is on processor B due to sometimes major hardware differences.

In your case, the MPC MCAL certainly cannot be used on MCS12 MCUs (MPC are 32bit PowerPC controllers while MCS12 are 16bit S12 controllers).

NXP can offer MCAL packages for S12ZVMC256 and S12ZVC MagniV micro-controllers.

For getting access to the installers you need to contact your local NXP support team. They can guide you on how to install and what kind of licenses/passwords are needed for each package.

Re: MCAL layer for S12 MCU

jakub_bendzala — Thu, 23 Nov 2017 13:38:55 GMT

Hello,

on web page:

AUTOSAR Software|NXP

is paragraph:

AUTOSAR 3.0

MPC56XX, S12/S12X

after click on the link, on the next page:

MCAL	Pricing	OS	Pricing
-	-	MPC5604E	Free
MPC563xM	Free	MPC563xM	Free
MPC5668G	Free	MPC5668G	Free
S12/S12X	Free	S12/S12X	Free

but there is no download for S12 or S12XS available.

Should I contact our distributor or UK NXP support?

Thank you!

Jacob