Which EVMs I need to purchase to setup LIN bootloader in MM9Z1J638.

churyjeong — Wed, 17 Jan 2018 07:01:22 GMT

Question) How to setup a test system for MM9Z1J638 LIN Bootloader

Dear who may concern about this issue,

I'd like to setup a test environment for LIN bootloader on MM9Z1J638.

Currently, I have a KIT9Z1J638EVM Board.

My target is to download IBS application code(Motorolar S-rec image) into the KIT9Z1J638EVM via LIN.

I'm not familiar with S12Z MCU and LIN protocol yet, so I'd like to setup a bootloader system like the picture above with the exist EVB board.

Could you please recommend which EVM boards I need to purchase to learn and practice myself the LIN bootloader, (Master-node and Slave-node both at the same time) ?

I'd like to purchase Demo programs with the EVMs too.

First of all, I'd like to learn "LIN bootloader" by following the quick-start guide with the demo program, without any change by myself.

Many thanks in advance.

2018-01-18

Additional question:

#1) If I purchase two sets of "S12ZVL" EVM from the link below,

DEVKIT-ZVL128: Development Board for ZVL128|NXP https://www.nxp.com/products/processors-and-microcontrollers/additional-processors-and-mcus/8-16-bit-mcus/16-bit-s12-magniv/s12zvl-mixed-signal-mcu-for-automotive-industrial-lin-applications:S12ZVL

Is it possible to configure the first one as a Master-node and the second one as a Slave-node with the different SW ?

And where can I get the bootloader SW for Master-node, and bootloader SW for Slave-node ?

Re: Which EVMs I need to purchase to setup LIN bootloader in MM9Z1J638.

danielmartynek — Sun, 21 Jan 2018 21:59:10 GMT

Hello,

Since the Figure 2 is taken from AN5389 S12Z MagniV LIN Bootloader, I assume you have already come across this application note.

The software can be found at this address: https://www.nxp.com/docs/en/application-note-software/AN5389SW.zip

It includes software for both the master and the slave ported on S12ZVL128.

So, you can use DEVKIT-ZVL128.

I’m not aware of any LIN bootloader ported directly on MM9Z1J638.

Regards,

Daniel

Re: Which EVMs I need to purchase to setup LIN bootloader in MM9Z1J638.

churyjeong — Mon, 22 Jan 2018 04:57:30 GMT

Thanks for the confirmation.

BRs

Chury

S12 / MagniV MicrocontrollersのトピックWhich EVMs I need to purchase to setup LIN bootloader in MM9Z1J638.

Which EVMs I need to purchase to setup LIN bootloader in MM9Z1J638.

Re: Which EVMs I need to purchase to setup LIN bootloader in MM9Z1J638.

Re: Which EVMs I need to purchase to setup LIN bootloader in MM9Z1J638.