topic Re: Workspace does not compile in S12 / MagniV Microcontrollers

Workspace does not compile

abhi1992 — Fri, 30 Jun 2017 08:21:34 GMT

I Downloaded a sample workspace for MC9S12G128 controller named " MSCAN driver for S12(X) devices " from NXP website see link:

http://www.nxp.com/products/automotive-products/smart-power-drivers/high-side-switches/mc9s12g128-ultra-reliable-16-bit-tower-system-module:TWR-S12G128?tab=Design_Tools_Tab

The workspace named " msCAN Driver S12G " for MC9S12G128 controller does not compile. I tried to fix it but couldn't get through it. Please help if someone can fix it.

Original Attachment has been moved to: MSCAN_S12_DEVD.zip

Re: Workspace does not compile

danielmartynek — Sun, 02 Jul 2017 16:52:52 GMT

Hi,

What message from CW do you get?

Regards,

Daniel

Re: Workspace does not compile

abhi1992 — Fri, 07 Jul 2017 11:02:39 GMT

Hi Daniel,

It is a syntax type error. Please have have a look at attached snip below. Can you try compiling the same work-space which I downloaded from st website. Please refer this link and download the Work-space named " MSCAN driver for S12(X) devices " . See Link:

http://www.nxp.com/products/automotive-products/smart-power-drivers/high-side-switches/mc9s12g128-ultra-reliable-16-bit-tower-system-module:TWR-S12G128?tab=Design_Tools_Tab

Re: Workspace does not compile

danielmartynek — Mon, 10 Jul 2017 12:37:47 GMT

Hi,

There is a problem in header files.

Header file msCANReg.h defines unions (such as CANCTL0) that are already defined in the original S12G128 header file mc9s12g128.h and used in the mc9s12g128.c file.

I have commented all the declarations in the mc9s12g128.h, mc9s12g128.c files and the CW5.1 doesn’t complain anymore. But I haven't tested the driver after the modification.

Regards,

Daniel

Re: Workspace does not compile

abhi1992 — Wed, 02 Aug 2017 10:00:42 GMT

Hi Daniel,

Thanks for the support. it helped.

Regards,

Abhishek