topic How to use Rappid bootloader with S12ZVML-MINIBRD kit ? in S12 / MagniV Microcontrollers

How to use Rappid bootloader with S12ZVML-MINIBRD kit ?

Maciek — Mon, 07 Nov 2016 21:19:23 GMT

I've flashed S12ZVM.rbf file into the board. When I'm trying download my application using Rappid PC-side application - I get the following error message: 'CCP Communication Error. Loss Communicatin with CCP MCU. Please cycle power and try again." Of course cycling power doesn't help...
How to slove this problem ?
Does this (S12ZVM.rbf) Rappid bootloader work with UART1 (which is accessible via USB on this board) ?

Thanks
Maciek

Re: How to use Rappid bootloader with S12ZVML-MINIBRD kit ?

iggi — Tue, 08 Nov 2016 09:46:12 GMT

Hi,

here is a webpage that gives Overview of RAppID Bootloader. You can launch a live presentation video or just open a presentation document.

Overview of RAppID Bootloader|NXP

Btw, please ensure the USB-to-SCI (UART port) operates correctly.

Check on your PC in Device and Printers if you see as below:

and Device Manager:

Hope this helps.

Regards,

iggi

Re: How to use Rappid bootloader with S12ZVML-MINIBRD kit ?

fengwang — Wed, 22 Feb 2017 07:51:40 GMT

Hello Maciek,

How did you solved this error , I have the trouble like you ! Can you help me ?

many thanks

Regards,

Feng