S12 / MagniV Microcontrollers中的主题 Re: S12UB UNIVERSITY BOARD https://community.nxp.com/t5/S12-MagniV-Microcontrollers/S12UB-UNIVERSITY-BOARD/m-p/517571#M12539 <HTML><HEAD></HEAD><BODY><P>I did the first 17 labs&nbsp;with this S12UB board but the Lab 18 says that is unfinished and under development. Is there any way to obtain this lab? Thx! <A class="jx-jive-macro-user" href="https://community.nxp.com/people/iggi">iggi</A>‌</P></BODY></HTML> Wed, 06 Jun 2018 12:53:05 GMT pablomartin 2018-06-06T12:53:05Z S12UB UNIVERSITY BOARD https://community.nxp.com/t5/S12-MagniV-Microcontrollers/S12UB-UNIVERSITY-BOARD/m-p/517569#M12537 <HTML><HEAD></HEAD><BODY><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">I'm experiencing some troubles with S12UB (product codes: LFEBS12UB and LFEBS12UBLAB).</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">The stand-alone kit, provide 21 labs, to get started with 9S12 architcture.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">The first lab (attached)&nbsp; just provide the basic information to connect the debug12 module with the PC through HyperTerminal. I follow all instructions (baud=9600, 8 bits data, no parity, 1 stop bit, xon/xoff etc.), but instead of visualizing the d-bug12 bootloader, i just recive from serial port random ASCII characters.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">I tried to change baud, connect in different ways the MODE pins, but i always get the same problem.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">i don't have a serial port on my PC, but i emulate it wit a prolific USB-to-Serial properly configured.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">I also don't have no idea, about what pin i have to connect with jumpers (if i have to do it).</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">Is there some specific instruction manual for S12UB?</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">Is it possible that data in FLASH/EEPROM memory are corrupted? how can i do to rewrite the d-bug12 program in the uC?</P></BODY></HTML> Wed, 08 Jun 2016 20:52:38 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/S12UB-UNIVERSITY-BOARD/m-p/517569#M12537 alessandrochiru 2016-06-08T20:52:38Z Re: S12UB UNIVERSITY BOARD https://community.nxp.com/t5/S12-MagniV-Microcontrollers/S12UB-UNIVERSITY-BOARD/m-p/517570#M12538 <HTML><HEAD></HEAD><BODY><P>Issue resolved by distributor replacing the board.</P></BODY></HTML> Wed, 15 Jun 2016 11:49:11 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/S12UB-UNIVERSITY-BOARD/m-p/517570#M12538 iggi 2016-06-15T11:49:11Z Re: S12UB UNIVERSITY BOARD https://community.nxp.com/t5/S12-MagniV-Microcontrollers/S12UB-UNIVERSITY-BOARD/m-p/517571#M12539 <HTML><HEAD></HEAD><BODY><P>I did the first 17 labs&nbsp;with this S12UB board but the Lab 18 says that is unfinished and under development. Is there any way to obtain this lab? Thx! <A class="jx-jive-macro-user" href="https://community.nxp.com/people/iggi">iggi</A>‌</P></BODY></HTML> Wed, 06 Jun 2018 12:53:05 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/S12UB-UNIVERSITY-BOARD/m-p/517571#M12539 pablomartin 2018-06-06T12:53:05Z