topic Re: S12ZVL32 Flash Programmer Fail in S12 / MagniV Microcontrollers

S12ZVL32 Flash Programmer Fail

zongliangchan — Sat, 16 Apr 2016 03:47:03 GMT

circled it is a wrong message!

MCU = S12ZVL32

IDE = CodeWarrior 10.6

Tool = USB-MultiLink

Please Help!

Re: S12ZVL32 Flash Programmer Fail

RadekS — Wed, 20 Apr 2016 08:05:44 GMT

Hi Zong,

Could you please share here the whole log from your console?

Files may be attached when you switch editor window into the advanced editor (in right upper corner).

Could you please also specify your operating system (USB BDM Multilink is not supported by PE drivers under Win10)?

It already worked before?

Are there any other error messages?

Could you please create a new empty project for S12ZVL32 and test load it into MCU?

Do you use any device which could externally reset MCU – for example, external watchdog?

If yes, please disconnect external reset from MCU during programming.

I hope it helps you.

Have a great day,
RadekS

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: S12ZVL32 Flash Programmer Fail

zongliangchan — Thu, 21 Apr 2016 02:20:54 GMT

Thank you
In order to solve this problem!

Use 'Flash File To Target' Function, Erase MCU after normal

this is my code cause this problem

Re: S12ZVL32 Flash Programmer Fail

RadekS — Thu, 21 Apr 2016 07:47:58 GMT

Hi Zong,

Thank you for your post.

Just for clarification: You erased the MCU by Flash programmer tool and now it works? Or this issue was caused by Flash programmer tool?

Best Regards,
RadekS

Re: S12ZVL32 Flash Programmer Fail

zongliangchan — Sat, 23 Apr 2016 03:47:09 GMT

Not Flash programmer tool problem

my source code have problem