FW: [S12 / MagniV Microcontrollers] - FW: LIN assign frame ID range problem

deepakchandra — Mon, 07 Mar 2016 05:05:01 GMT

Dear sir ,

Please help me out in below problem its very urgent .

Sir, have to add some additional feature in our diagnostic class 2 as required by customer as listed below .

reset , information , hw vesion, sw version etc i have to the use SID c6,c8 in our slave but i don't know how to do ,please suggest .

for example for reset .and information of ecu are listed below

From: Deepak Chandra

Sent: 04 March 2016 10:01 AM

To: 'jive-1490806716-5tot-2-dasa@mail.freescale.jiveon.com'

Subject: RE: - FW: LIN assign frame ID range problem

1.now i have to add some additional feature in our diagnostic class 2 as required by customer as listed below .

reset , information , hw vesion, sw version etc i have to the use SID c6,c8 in our slave but i don't know how to do ,please suggest .

for example for reset .and information of ecu are listed below

From: RadekS

Sent: 02 March 2016 08:25 PM

To: deepak chandra

Subject: Re: - FW: LIN assign frame ID range problem

NXP Community

FW: LIN assign frame ID range problem

reply from Radek Sestak in S12 / MagniV Microcontrollers - View the full discussion

Hi deepak,

Since this question/discussion is here twice, we could continue in just once:

https://community.freescale.com/thread/386513

Have a great day,

RadekS

Reply to this message by replying to this email, or go to the message on NXP Community

Start a new discussion in S12 / MagniV Microcontrollers by email or at NXP Community

Following FW: LIN assign frame ID range problem in these streams: Inbox

This email was sent by NXP Community because you are a registered user.

You may unsubscribe instantly from NXP Community, or adjust email frequency in your email preferences

Re: FW: [S12 / MagniV Microcontrollers] - FW: LIN assign frame ID range problem

RadekS — Wed, 09 Mar 2016 18:48:19 GMT

Hi deepak,

Since this question/discussion is here twice, we could continue in just once:

https://community.freescale.com/thread/386513

I hope it helps you.

Have a great day,
RadekS

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic FW: [S12 / MagniV Microcontrollers] - FW: LIN assign frame ID range problem in S12 / MagniV Microcontrollers

FW: [S12 / MagniV Microcontrollers] - FW: LIN assign frame ID range problem

Re: FW: [S12 / MagniV Microcontrollers] - FW: LIN assign frame ID range problem