9s12 wake up by XIRQ

jiongzhongliu — Mon, 21 Dec 2015 09:22:11 GMT

Now I use the MCU MC9S12XET256, when the MCU in the Stop or Wait Mode ,I can wake it up by a input Interrupt(PP2),Now I want to wake it up by the PIN XIRQ, which regiter or instruction I should program before it go to stop or wait mode., The datasheet say XIRQ enable by cleaer the X-BIt in CPU conditon code register,and I don't particularly understand.

Re: 9s12 wake up by XIRQ

RadekS — Mon, 21 Dec 2015 16:06:44 GMT

Hi jiongzhong,

X bit is part of CCR register (Condition code register, one of CPU’s basic registers).

You could clear this bit similar way how you clear S bit prior STOP mode.

So, for example:

asm ANDCC #0x7F; //clear S bit

asm ANDCC #0xBF; //clear X bit

asm ANDCC #0x3F; //clear S and X bit

For more detail, please see CPU12X reference manual:

http://www.nxp.com/files/microcontrollers/doc/ref_manual/S12XCPUV2.pdf

I hope it helps you.

Have a great day,
RadekS

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

S12 / MagniV MicrocontrollersのトピックRe: 9s12 wake up by XIRQ

9s12 wake up by XIRQ

Re: 9s12 wake up by XIRQ