S12Xe TIM and ECT Output Compare Pins

rayhall — Tue, 09 Feb 2016 09:06:02 GMT

When I look at the datasheet it has the external pin descriptions for TIM and ECT as the same pins ?

TIM

22.2.8 IOC0 — Input Capture and Output Compare Channel 0 Pin

This pin serves as input capture or output compare for channel 0.

ECT

14.2.8 IOC0 — Input Capture and Output Compare Channel 0

This pin serves as input capture or output compare for channel 0.

I see there that pin 4 has 5th function called TIMIOC0. Is the datasheet wrong and should be like this...

TIM

22.2.8 TIMIOC0 — Input Capture and Output Compare Channel 0 Pin

This pin serves as input capture or output compare for channel 0.

ECT

14.2.8 IOC0 — Input Capture and Output Compare Channel 0

This pin serves as input capture or output compare for channel 0.

Ray.

Re: S12Xe TIM and ECT Output Compare Pins

lama — Tue, 09 Feb 2016 11:45:05 GMT

Hi,

yes, it looks like typo. It would be better to use term TIMIOC however the chapter 22.2.8 says nothing about pin assignment it only describes pin function. The best approach is to look at Table 1-9. Pin-Out Summary to get pin-out.

Best regards,

Ladislav

topic S12Xe TIM and ECT Output Compare Pins in S12 / MagniV Microcontrollers

S12Xe TIM and ECT Output Compare Pins

Re: S12Xe TIM and ECT Output Compare Pins