topic Re: Upgrade problem(Old OSJTAG/OSBDM firmware),need jump 2-pin bootloader header(JM60 IRQ to GND) on a VLG M9S12zvc in S12 / MagniV Microcontrollers

Upgrade problem(Old OSJTAG/OSBDM firmware),need jump 2-pin bootloader header(JM60 IRQ to GND) on a VLG M9S12zvc

kevinphilllips — Tue, 08 Mar 2016 12:48:23 GMT

need jump 2-pin bootloader header(JM60 IRQ to GND) on a VLG M9S12zvc but im not knowing where is this 2-pin jumper, and i cant do nothing until i fix it,

maybe is it a software solution or a good hardware schematic ?

thanks you all in advance !

Re: Upgrade problem(Old OSJTAG/OSBDM firmware),need jump 2-pin bootloader header(JM60 IRQ to GND) on a VLG M9S12zvc

iggi — Wed, 09 Mar 2016 10:05:40 GMT

Hi,

Here is the schematic of the demo board:

VLG-MC9S12ZVC Board Schematics (REV B)

See the sheet 7 of 13 titled OSBDM. There si the J36 jumper and it should be the one you need.

Regards,

iggi

Re: Upgrade problem(Old OSJTAG/OSBDM firmware),need jump 2-pin bootloader header(JM60 IRQ to GND) on a VLG M9S12zvc

kevinphilllips — Fri, 18 Mar 2016 08:07:20 GMT

That's work perfectly thanks you very much !